LAND ROVER Car Key Replacement in Windsor

In most cases, no. When all keys are lost, the dealer's standard procedure is to replace the Keyless Vehicle Module (KVM on 2010–2017 models) or Remote Function Actuator (RFA on 2018+ models) entirely – a $1,500 – $3,500+ part plus $500 – $800+ in labour and programming fees. Canadian Locksmiths uses the Yanhua Mini ACDP Master with dedicated JLR software to read the existing module's security data via the OBD-II port and program new HITAG PRO ID49 transponder keys directly to your existing KVM or RFA. For a 2020 Range Rover Sport (FCC: KOBJXF18A), our team reprograms the RFA module and cut two new HU101 emergency blades on-site for $399 – $499+ total. Land Rover Windsor at 9275 Tecumseh Rd E quotes $3,000 – $7,000+ for module replacement with a 7–14 day wait for UK-sourced parts. Our team' approach saves your original module and gets you driving again – no tow truck, no rental car, no multi-week wait.

Yes. After 2018, Land Rover pushed a firmware update through their SDD diagnostic system that locks KVM modules from accepting additional aftermarket key programming. The dealer's standard response is to replace the locked module entirely – costing $1,500 – $2,500+ for the KVM unit alone plus labour. Canadian Locksmiths uses the Abrites Commander with JLR-specific security protocols to interface with locked KVM and RFA modules via OBD-II or bench connection. The team reads the encrypted security seed, generates valid key data, and programs new HITAG PRO ID49 smart keys (FCC: KOBJXF18A for Range Rover Sport, KOBJTF10A for Discovery) without replacing the module. This process takes 60–90 minutes on-site and starts at $349. Land Rover Windsor at 9275 Tecumseh Rd E charges $2,000 – $4,000+ for module replacement with parts ordered from Solihull, UK – typically a 2–3 week wait. This saves your existing module and gets you driving, in most cases the same day, across Windsor and Essex County. local Land Rover owners who call Canadian Locksmiths instead of having the vehicle towed to Land Rover Windsor for module replacement save an average of $1,500 – $3,500+ in parts costs plus the tow bill and rental vehicle expense during the 2–3 week parts wait from Solihull, UK.

Land Rover key replacement starts at $99 for an emergency HU101 key blade cut to your vehicle's VIN. A spare PEPS smart key fob when you have a working key starts at $249 – Canadian Locksmiths programs the new HITAG PRO ID49 chip to your KVM or RFA module using our key programming system. All-keys-lost recovery ranges from $499 – $999+ depending on whether your vehicle has a KVM (2010–2017 Discovery, Range Rover Sport) or RFA (2018+ Velar, Defender, new Discovery). For example, a 2021 Range Rover Velar all-keys-lost recovery with FCC ID KOBJXF18A starts at $449 including two new smart fobs, HU101 blade cutting, and full RFA reprogramming. Compare that to the dealer where all-keys-lost with module replacement can exceed $3,000 – $7,000+. Older models with Tibbe key blades (pre-2005 Discovery, Freelander) start at $99 – $149+ for transponder programming. Call (519) 979-1270 for an exact quote – pricing depends on model year, key type, and whether working keys remain.

Canadian Locksmiths services all Land Rover models sold in Canada from 2005 forward, including the latest Defenders and Range Rovers with Ultra Wide Band (UWB) secondary security. The newest 2020+ models equipped with K8D2 RFA modules use UWB for precise spatial awareness – the vehicle detects exactly where the key is relative to the door handles and cabin. The mobile diagnostic hardware with JLR Pathfinder-level access handles UWB-equipped vehicles including the 2024 Range Rover (FCC: KOBJXF18A), 2023 Defender 130, and 2024 Discovery Sport. The UWB layer is a secondary security feature – the primary HITAG PRO ID49 transponder authentication and PEPS proximity functions are programmed through the RFA module via OBD-II, which the diagnostic platform fully supports. Programming takes 60–90 minutes on-site. Call Canadian Locksmiths at (519) 979-1270 with your VIN and the technician will confirm exact coverage and pricing before the technician dispatches anywhere in Windsor or Essex County. Transport Canada regulations require all Land Rover key fobs in Canada to meet the Canadian-specification JLR frequency. Canadian Locksmiths programs only Canadian-specification key fobs for Land Rover vehicles registered in Ontario, which ensures the fob matches the Canadian JLR vehicle specification and complies with Industry Canada RF emission standards. All fobs are tested for lock, unlock, trunk release, and panic functions before the technician departs.

A spare Land Rover key with a working key present typically takes 45–60 minutes on-site. The Xhorse VVDI Key Tool Max Pro connects to the OBD-II port, authenticates with your KVM or RFA module, and registers the new HITAG PRO ID49 smart key. Canadian Locksmiths then precision-cuts the HU101 emergency blade and tests all functions. All-keys-lost recovery with KVM reprogram (2010–2017 models like Discovery 4, Range Rover Sport L494) takes 1.5–2 hours. RFA reprogram on 2018+ vehicles (Velar, new Defender, Discovery 5) takes 2–2.5 hours due to enhanced security protocols. Compare this to Land Rover Windsor at 9275 Tecumseh Rd E – they require a tow, a 7–14 day wait for UK parts, and multiple appointments. Our team provides scheduled service at your location anywhere in Windsor, Tecumseh, LaSalle, Amherstburg, Lakeshore, Essex, Kingsville, Leamington, Belle River. Within Windsor, service covers Walkerville, Riverside, South Walkerville, West Windsor, Forest Glade, Pillette Village, East Riverside, Fontainebleau, South Windsor, Roseland, Olde Sandwich Towne, and all neighborhoods within Windsor CMA. Call (519) 979-1270 to dispatch a technician to your location.

No – Canadian Locksmiths provides complete all-keys-lost recovery at your location across Windsor and Essex County. No tow truck required. For KVM-generation vehicles (2010–2017 Discovery 4, Range Rover Sport L494, Range Rover L405), our team connects the key programming tool to the OBD-II port and reads the KVM security data to generate valid key credentials. For RFA-generation vehicles (2018+ Range Rover Velar, Discovery 5, new Defender), the technician accesses the Remote Function Actuator module using JLR-specific protocols. In both cases, our team programs new HITAG PRO ID49 smart keys (FCC: KOBJXF18A or KOBJTF10A), cut fresh HU101 emergency blades, and test every function – proximity unlock, push-button start, tailgate release, and emergency blade access. The entire process takes 1.5–2.5 hours depending on module generation. Land Rover Windsor at 9275 Tecumseh Rd E requires the vehicle to be towed to their shop, then orders parts from the UK – a 7–14 day wait minimum. Our team saves you the tow bill, the rental car, and the downtime. Service starts at $999.

Yes. Canadian Locksmiths is the independent alternative to Land Rover Windsor at 9275 Tecumseh Rd E for all Land Rover key programming locally. Our team carries the Xhorse VVDI Prog – a proven aftermarket diagnostic tool for Jaguar Land Rover vehicles – along with SDD-compatible interfaces for older models. Whether you need a spare PEPS smart fob for a 2022 Discovery Sport (FCC: KOBJTF10A, starts at $249) or full all-keys-lost recovery for a 2019 Range Rover Velar (FCC: KOBJXF18A, starts at $449), every service is handled on-site. The van carries HITAG PRO ID49 and PCF7953 ID46 key blanks, HU101 cutting equipment, and Tibbe cutting tools for classic Land Rovers. Programming is done via OBD-II port on-site – no flatbed, no appointment queue, no 7–14 day parts wait. Land Rover Windsor at 9275 Tecumseh Rd E is the authorized JLR retailer. Our team provides the mobile on-site alternative across Windsor's local JLR key specialist with scheduled mobile service.

The KVM – Keyless Vehicle Module – is the central security gateway in Land Rover vehicles from approximately 2010 to 2017, including the Discovery 4 (LR4), Range Rover Sport L494, Range Rover L405, and Range Rover Evoque L538. It stores encrypted key credentials, controls PEPS proximity detection, manages push-button start authorization, and communicates with the engine immobilizer. In 2018+, Land Rover transitioned to the RFA – Remote Function Actuator – which serves the same purpose with enhanced encryption on vehicles like the Velar, Discovery 5, new Defender, and updated Range Rover. When all keys are lost, the KVM or RFA must be reprogrammed to accept new key data. Dealers often replace the entire module ($1,500 – $3,500+ plus labour) because their SDD diagnostic system defaults to module swap procedures. Canadian Locksmiths uses the automotive key programmer to reprogram your existing KVM or RFA without replacing it – saving thousands. The module stores up to eight key slots, and our team can add, delete, or reprogram keys in any slot via OBD-II or bench connection.

The "Smart Key Not Found" or "Smart Key Not Detected" warning on your Land Rover dashboard means the PEPS (Passive Entry Passive Start) system cannot communicate with your key fob. Common causes include a dead CR2032 battery in the fob – Land Rover smart fobs (FCC: KOBJXF18A, KOBJTF10A) use a standard CR2032 that typically lasts 18–24 months. Replace the battery first. If the warning persists with a fresh battery, the fob's HITAG PRO ID49 transponder chip may have lost synchronization with the KVM or RFA module. This can happen after a vehicle battery disconnect, a failed software update at the dealer, or electrical interference. Canadian Locksmiths re-syncs the key to the module using the diagnostic platform via OBD-II in 15–30 minutes on-site – starting at $99 for a resync. If the fob itself has failed, a replacement PEPS smart key starts at $249 with programming included. Use your HU101 emergency blade to manually unlock the driver's door and place the fob against the steering column to start the engine while you arrange service.

Land Rover uses three key types across its model range. A PEPS proximity smart fob (FCC: KOBJXF18A for Range Rover Sport 2018+, KOBJTF10A for Discovery 2017+) is the current standard – push-button start, proximity unlock, HITAG PRO ID49 transponder. The key stays in your pocket. Includes an HU101 emergency blade insert. Starts at $299 for a spare, $399 – $499+ all-keys-lost. A remote head key with flip blade (HU101) was used on Discovery 3, Freelander 2, and some Range Rover Sport models from 2006–2015. It has a PCF7953 ID46 or PCF7945 transponder chip – you insert and turn to start. Includes remote lock/unlock buttons. Starts at $199 for a spare. A Tibbe transponder key is the classic Land Rover key used on Discovery I, Discovery II, Freelander, and early Range Rover models pre-2005. The distinctive Tibbe blade pattern is cut on specialized equipment. Uses older transponder chips. Starts at $99 – $149+. Canadian Locksmiths programs all three types on-site using the Lock50 and carries all key blanks in the mobile unit.